DIY : How to make a Vertical Hydroponic Tower (Part 1)
DIY : How to make a Vertical Hydroponic Tower (Part 1)
#DIY
#VerticalHydroponicTower
material needed:
~ PVC pipe 3 inchi
~ net pot has diameter 5 cm
~ Heat gun
~ PVC pipe 1 1/4 inchi
DIY : How to make a Vertical Hydroponic Tower (Part 2)
Wow genius! Gonna do this myself. Thanks for sharing
*This looks great, the best looking method* 👍
Wow! Great work
What is the wall thickness of the 3" pipe you are using? Mine doesn’t seem to be as easy to manipulate as the ones you have in the video. I got it done, but it was messy. 🙁
Make holes like a PRO
😀
Hmmmmm will water just spill out?
7 minuta filmu. Brawo Ty !!!
That’s not a hydroponic tower.
Where do you get the little pot from that goes into the holes
merk paralonnya apa?
हिट के बाद जो पाइप अंदर डाल रहे है उसका साइज क्या है सर
Excellent!
How much is the net pod size
Amazing, great job.
would it be possible to use a 1 1/2 inches pipe to make the hole? or it would be too big?
Brilliant… Thanks so much for all your efforts.
Pretty cool method, boss.
So how do u you water it?
Netpotnya pakai ukuran berapa Pak?
Well done mate..very creative, gonna give it a go 4 sure😄👍🇦🇺🇦🇺🇦🇺❤
bagaimana cara penyiraman pokok nya ?
Hi , I am your regular follower from India . You Rock … Please give titles in English .
Great job. How do you prevent the pipe from ripping when pushing in the 1 1/4 pipe? each time I have tried, the 3" rips down each side.
Excellent, thank you!
You re the best !
almost like factory mould. great job.
Vou começar hoje mesmo. Grato!!
Great trick for making clean looking holes 👍🏾👍🏾
Bonjour le tuyau utiliser pour former ces quel diamètre ??
Where should I buy the best aeroponics vertical system? And where is the aeroponics vertical system available in India?
Best I have seen yet
I built this! Used a 5gal home depot bucket for the reservoir. The beer bottle trick is genius!
DIY : How to make a vertical tower hydroponic system (Part 2)
https://youtu.be/1b0UMW0X1vo
Hermano, muchas gracias. Brother, thanks so much
Anyone using 2 inch net cups – use 4 inch pvc down pipe for the main tower but make the slits at least 5cm wide and use 1.5 inch pipe tapered to a point at one end to make the holes in the slits. Worked for me. 2” net cups sit nicely in the holes. I made a 1.8 metre tall tower from a 4” wide downpipe and using the technique in this video for the holes for the net cups. Attach a 15mm or 20mm wide straight tube or pvc pipe to a mini submersible water fountain pump in a bucket or tub with a lid, cut 4” diameter hole in lid for tower to go through and put the finished tower system over the pump/tube sat in the bucket of water. Put a cap on the top of the tower or cover with plastic bag and elastic band at least. Switch pump on a timer if possible set to 10 minutes on, 10 minutes off and experiment.
Good instructions and aesthetic too 😍
This system would probably be more appropriate for non-edible since there would be a leaching of the plastic into any food that you would be growing and consuming.. The little black pots that you put your Pea Pebble or whatever media you are using is called a neti pot and can be bought online directly from China at the cheapest price ,or Alibaba. You will have to buy quantity through Alibaba. The best thing to do is buy local at a grow store to see if the system will work for you. you will absolutely need to have a food grade plastic so that you are not ingesting PVC which can cause respiratory problems among other things. This system can be replicated with a larger five gallon bucket that is food grade and you can obtain the buckets for free from a local grocery store that uses them with pre-made frosting with shortening and such from the bakeries as well as BBQ sauces at a BBQ place and still melt the ports the same way in the food grade buckets. You can put about 12 ports per bucket and you’ll be using a food-grade bucket with no PVC leaching into your food common good luck have fun be creative
very nice sir I hope I can make it
Bang klo ukuran netpot ny 5cm berati ukuran garis yg mau di bikin lubang 5cm jga y….mhon di bls y…
That’s looks professional
good job
Hi …good job man…i ‘ Ve do It but i have a problem…. water come out from the holes …but i don t know why 😃
Your system is the best I have seen of getting the pots to the inside of the large pipe so make sure water hits all the pots. Ingenious method of using the pipe to make the bend. Why both spend money on pvc y joints when this works better and gets the pods inside.
Kemas dan hebat👏👏👏👏👍👍👍👍👍
Great work! What can I do if water is leaking out of the side holes?
Tem o próximo vídeo de como dar água e plantar? Obrigada
How do you make your tower stable in the bucket?
size of net cup?
Very interesting and impressive what about to clean the that sistem