Ez Clone VS Turbo Klone – Product Review & Directions EZclone TurboKlone Online eHydroponics Store
Ez Clone VS Turbo Klone – Product Review & Directions EZclone TurboKlone Online eHydroponics Store
We put the clear (display model) EZ Clone & The TurboKlone head-to-head and compare the features and benefits. The models you purchase have all black plastic (Of Course). We are showing the clear models so that you can see the inner workings.
TurboKlone T24: https://monstergardens.com/turboklone-t24-cloner-turbo-mini-w-humidity-dome.html
EZ Clone 32-site: https://monstergardens.com/ez-clone-low-pro-32-cutting-system-white.html
Check out all our clone machines here: https://monstergardens.com/products/cloning-propagation/cloning-machines.html
www.MonsterGardens.com
You didnt day anything about ph of water or how long to use dome for.!
Turbo Kloner for the win
What a waste of money. Just put it in a cup of water for a couple of days after cutting off some leaves and u will have clones…
What brand do you feel works better ? Ex clone or turbo klone ?
the most un informative video in history
Both Overkill✌🏽
i think the fan is for people that use the turboklone w/ an on/off cycle timer set to "briefly on" and "much longer off". the fan helps bring in fresh air to promote root production during the off periods. this saves way over 50% power usage and avoids spiking the rez w/ heat from a 24/7 pump. and finally, the turboklone uses less water and provides more sites than the other brand. EZ choice.
Ok, so there’s a few mistakes already (I’m halfway through the video)
1) the fan on the Turbo Kloner is always on. So it brings in air all the time regardless of the conditions.
2) Those bubbles in the EZ cloner don’t add anything to the water because they are not pressurized enough. There’s not enough agitation for it to have any effect on the dissolved oxygen content in the water. Even when the water is sprayed, the amount of atomization isn’t enough for much oxygen to have an effect on the water.
3) Adding oxygen to the water isn’t what this system is about: the roots have access to oxygen by the fact that they are dangling in the air. The water is for all the other things the plant needs – the oxygen is already taken care of.
Now to watch the rest of this video…
Why on earth would anyone make or buy a cloner that lets light through like these clear monstrosities? Everyone knows light is not good for roots (that is why they are underground) as well as the fact that any light getting in promotes algae, which is why DWC buckets are black.
Where did they get the clear ones?
Light kills roots
thx 4 nothing dumbass
I’d be interested in Either, but both need a Scaled Down Version, The right kind of Plugs ie Slotted Plugs Over Plugs with Holes That Obviously tear off Very Fragile Roots… I Liked The Premise of Video by default so U get an a for Effort, but lack in Substance of Pros and Cons of Each vs some Purposeless Display… It is what it is…
How often do you need to refill the water?
Hey, where the hell is that humbolt ecoclone fogponics thing? It showed up out of no where and then just vanished just as fast. What the hell is that about?
My Turboclone T24 takes 21 days to get good roots ! I use 40ml of Clonex solution ! I this enough ?
Why would you make em transparent and on top put airaition in an AEROPONIC cloner.. I mean who are you teaching? First grades with zero basic knowlege to fool’em into fancy cloners?
EDIT: Just saw this video is 10 years old.. I guess this was legit back then, even without the roof over the head xD These cloners are hilarious unpractical.
Hi I can’t find the clear version on your website do you have a link?
nice nice lol
Airtube is so useless. The stems are surrounded by air. Its just for show… Any grower knows that
I used mine for one day only water sprays out the sides and reservoir is small so it stop spraying once all the water sprays out the sides …I’m very disappointed… I’ll give it away if anyone wants it 🤙🏿
Isn’t a transparent bucket the exact opposite of what u want in a cloning machine?
Roots hate light while algea loves it.
These are both clear for demonstration to show how they work. You do not want a clear cloner for any of you asking. Also there is no need to run your pump/sprayers 24/7…1 minute on and 7- 10 minutes off.. This gives the cuttings time to dry and avoids rotting and mushy stems.. Saves energy.. And avoids your water from over heating. The best clone machines use a fogger, you can buy one for about 10 bucks on ebay and still run it for a minute or 2 and leave it off for 10 minutes… Uses way less water and the microscopic water particles penitrate the cuttings much better and don’t damage the smaller roots that sprout
CLONE KING blows away both of these overpriced cloners. Go check the ratings for ez clone turbo klone and clone king on amazon Clone king is the highest rated cloner by customers anywhere on the planet and BETTER DESIGN BETTER PRICE!!! ALL AROUND BETTER!
i did all that and kept my temps under 70 degrees i used the rezclear plus 1 tbs per gallon of bleach and still grew nothing but brown slime. yep 300+ on an ezclone and 300+ on a chiller most toxic chemicals i could think of and still a sludgy messs
Freash air is being brought in w/both units only the ez cloner has the added function of airpump and bubble hose.. if my roots grow into the ater i’d rather have it airated to the max, ask the folks at UC Davis what they think lol. the heat of the ez cloner is being mitigated as the air pump pushes old air out of the unit as more comes in..
⬆️⬆️⬆️ I got the card from him he help me with my cards at good rates and it’s an affordable price with good balance 🥳❤️🥰✅
Lazy-Cloner vs the moron-Kloner….
I can’t believe all the idiot’s that commented on this video.
Oh is it clear like that?
Light isn’t good for roots.
Oh I think the fan is to take in air when the pump is off.
Oh I bought one of these and all I got was brown slime.
I purchased a turbo cloner 10 years ago. And I’ve diy’d 6 more.
I’ve never had any problems with any of them.
I use nothing but plain water and roots start showing in 3 to 5 days. With 100 percent success rate.
You just got to be smarter than the cloner, da.
Plus it helps to know how to read and follow directions.
Turbo Klone is NOT cheaper at all.
What do you do when yours stops spinning and gets clogged
spaying it through the sprayers is 100 times more efficient than the bubbles the easy clone is just costing you a little more money for the power for the air pump witch will dray 2 to 5 times more power than the 12 volt exhaust fan
Lot of this build is irrelevant nowadays. Clear plastic for a root zone!? They’ll never sleep!
Which one is best?
If I wanted to purchase a clear one do you guys sell that how do I go about getting a clear one
None of theses will keep my leafs alive mist and nice while waiting for the roots grow!?.
do not see anything in these gadget that will makes my roots coming out faster.
what one is better????
Which one produced roots quicker? If both the same…than its a no brainer!!
And lastly, actually grow what your target market why to see: cannabis plants quickly growing healthy roots…..
Thanks Monster Gardens! I find myself watching lots of your videos & they are all very helpful. Cheers!
And the actual comparison isn’t really there. This is a sales point listing not a comparison / review.
How about talking about height differences? Or the number of sprayers compared to the numbers of sites? Or the type of sprayers, and which one does a better job? And finally, a side by side comparison to see the end results: how the roots look and how long it took?
This is what I wanted to see when I read the deception.
What about you guys: do you feel fulfilled by this video? 😂
Can I still get the clear model I don’t care about algee